unity connection 8.6 compatible with cucm 11.5?

[baselzind]

im upgrading a cucm from 8.6 on a vm to 11.5 , but it is already integrated to a "8.6.2ES25.21900-25" unity connection , is the unity connection "8.6.2ES25.21900-25" compatible with cucm 11.5?

[Jitender Bhandari]

Hi,

Yes it is compatible you dont have to worry you can upgrade the CUCM to latest 11.5.X.

(Rate if it helps)

JB

[Jitender Bhandari]

Hi,

Just to confirm you can see below

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/b_cucclientmtx.html#id_24435

Supported Version Combinations for Unity Connection and Cisco Unified Communications Manager

Table 17 Supported Version Combinations for Unity Connection and Cisco Unified Communications Manager

Cisco Unity Connection	Cisco Unified Communications Manager
8.5 and Later	11.5(1), 11.0(1), 10.5(2), 10.5(1), 10.0(1), 9.1(2), 9.1(1), 9.0(1), 8.6(2), 8.6(1), 8.5(1)

(Rate if it helps)

JB

[Rob Huffman · Accepted solution]

Hi there,

You should be good to go;

Supported Version Combinations for Unity Connection and Cisco Unified Communications Manager

Table 17 Supported Version Combinations for Unity Connection and Cisco Unified Communications Manager

Cisco Unity Connection	Cisco Unified Communications Manager
8.5 and Later	11.5(1), 11.0(1), 10.5(2), 10.5(1), 10.0(1), 9.1(2), 9.1(1), 9.0(1), 8.6(2), 8.6(1), 8.5(1)

From;

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/b_cucclientmtx.html#id_24435

Cheers!

Rob

EDIT: +5 for my friend JB for beating me to the punch here.