Unified Communications Infrastructure

Hi All, Would like to understand the syntax. If there is incoming call 995XXX should it be match to this incoming dial-peer. dial-peer voice 200 voip destination-pattern .T session target ipv4: cucm ip incoming called-number # tmf-relay h245-signal...

Was wondering if anyone had a template/Process guide which could be followed when adding new sites to Call Manager (10.5). IE - 1) Create Device Pool 2) Create Partitions 3) Create Calling Search Spaces .....,.Etc Something that can be followed as ...

Hi Expert and Every Member,My UC System include 2 CUCM 6.1 , 1 Unity Connection 2.0, 1 Voice Gateway 3825 with 12 FXO, 1 Operator with IP Phone 7962 ( 2 Expansion Module 7914). We can do outbound call very well. Unfortunately, when customer from PSTN...

Hi All, I would just like to clarify if we can apply the latest devpack cmterm-devicepack9.1.2.16147-1.cop.sgn to CUCM 9.1.1 to support 78XX IP Phones? As per checking with the CUCM Device Package compatibility matrix: Only Unified CM 9.1(2), 10.5(2...

Hi,  I'm inherited a Cisco Jabber environment and am rather new with it and I've been tasked with making some setting changes.  I've been able to read a bit on it and follow some youtube videos but one change my Firm would like to make is to set jabb...

Hi all,seems to me this can't be true but when attended one telepresence class they told me the following:"It is recommended to install CUCM with DNS enabled even if it will not be used initially. If you do not select the DNS option during installati...

I need to set up CUCM. How do I do this?

Dears, We need to make time attendance using ip phone the call manger version 10.5  Apperciate your feedback  Regards