12-12-2011 09:40 AM - edited 03-19-2019 04:06 AM
Hi all,
I tried to configure a cluster of unity connection so I create subscriber server on publisher "System Settings->Cluster" and I introduced the IP os subscriber. After that I change the "Failover Collector" pointing to new subscriber. I restarted Conversation Manager and Mixer services but when I go to "Serviceability Connection" and select "Cluster Management" only appears the publisher server, What can I do? Also I tried cli "utils cuc cluster makeprimary/activate" but tells me that Publisher is not in cluster.
Thank you
Regards
12-12-2011 03:02 PM
Great question ,if it doesnt get answered I will be disappointed
12-12-2011 03:05 PM
Hi,
You can only create a subscriber upon installation. I just wanted to make sure that you didn't install two standalone UC servers and expect to be able to join the two together after the fact - it's not designed to work that way. Make sure the IP address of the subscriber is configured on the publisher, then go ahead and install the subscriber and make sure you choose the option that designates it as the second server in the cluster.
Hope that helps,
Brad
12-12-2011 11:15 PM
Hi Brad,
It is solved.Yesterday I installed subscriber choosing second node cluster installation but it did not appear on publisher so I must reinstall the subscriber again and now it appears on publisher as subscriber node. I think that the second node is not shown on publisher until the installation of subscriber is complete although the first time it didn't, is the only reason I found.
Thanks for your help, 5 points for you!
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide