Upgrading C260 firmware

[svadmin]

Hello,

We have UCS C260 M2 with firmware version 1.5(7e), and I am trying to upgrade the firmware so we can upgrade the EXSI version as well.

My question is can I upgrade from 1.5(7e) to 1.5(9f) directly or do I need to do intermediate upgrade ?

[Amine Nouasri]

Always check the release notes. According to the link below 1.5(9) doesn't have any  doesn't have any prerequisites:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/RN_UCS_CSeries_1_5_9.html#pgfId-541705

But you should review the document to be safe.

[svadmin]

Thank you Amine for your reply,

Here is a link that I found for upgrading the firmware, and I believe I will need to use "Update All Options" section.  is this sufficent or do I need to do other things.  I am hoping not to crash it!!

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/lomug/2-0-x/b_huu_2_0_13/b_huu_2_0_13_chapter_011.pdf