Hi I need to know if the IX5000 TP unit's firmware can be upgraded via a 3rd Party TFTP Server, or is using the CUCM TFTP the only way of upgrading the Unit. Thanx in advance
Hi I need to know if the IX5000 TP unit's firmware can be upgraded via a 3rd Party TFTP Server, or is using the CUCM TFTP the only way of upgrading the Unit. Thanx in advance
Hi Guys i have 2 Independent CUCM CUCM-1 192.168.100.100 CUCM-2 192.168.100.101 I need to designate CUCM-2 as Subscriber , what i have done is on CUCM-1 , i have added CUCM-2 as Subscriber but still dont show up as Pub/sub what steps i miss...
Hi Guys, I am new here on the Support Forum. I have a few small questions regarding Ad-Hoc Conferencing on a BE6000S system. When you make a conference call and have lets say 5 people in the group and you as the initiator disconnects or ends the c...
Hello everyone I'm sorry if my question was so poor. I'm quite new to these voices technology. So I need an exact understanding about this. What is the difference between trunk and a gateway (voice gateway)? when should I use them? My topology is : ...
Hi ladies and gentlemen, may be I have a easy question... but I can´t find an answer in the posts before or on the help sites from Cisco. I want to put in Webex Cloud Services (Microsite) into Jabber. I have to configure it on the Cisco Unified CM ...
greetingsI am trying to configure my "IMP Server" but when I add all the data that a loop gives between verifying Connectivity Validation, verifying CUCM validation and Verifying security configurationI have not added DNS , add the IMP server data in...
Hi I’d like to find out if there is a way on Jabber to have ‘Use my computer for calls’ set on all PC’s a user might log into? We have an exec who moves between PC’s and he has to select this every time he moves to the other PC to get calls coming in...
HelloWe lost the CUCM Pub, CUC Pub and the CUPS 8.6 publisher due to hardware failure and managed to get it rebuild and uploaded the licenses as well. We managed to restore both CUCM and CUC using the subscriber database using the Cisco recommended p...
Buenas Tardes a todos, tengo dudas de como solicitar la licencia LIC-TP-10X-ROOM, aparentemente el TOP Level SKU es el R-UCL-UCM-LIC-K9. De hecho puedo ubicar la licencia dentro de la opción "CUCM Video and Telepresence User Licencing"e inclusive pue...
I did the call forwarding on my desk phone , now when i receive a forwarded call its not showing the caller id number , it shows that a mixed number between the original number ( last 4 digits) and the desk phone (first 4 digits). i want just the o...
Hi community, is there a way to search for incoming anonymous calls in CUCM CDR search? I've tryed "null" "anonymous" "unknown" also with different wildcards but I'm just able to find the calls if I search for the destination number. Is there any...
... moved to Cisco IT ...
Hello;I am working on a UC560.When I run the telephony setup wizard, it informs me that I have a problem and that I should reset factory default the system.When I try to reset the system from CCA i obtained this message "Reset Cue failed"I try to res...
We are moving 4 Subscribers to the new Data Center and changing IP addresses on 4 Subs. We plan to do vmotion. My question is - do I change the IP addresses of the Subs BEFORE vmotion? OR change the IP addresses on the Subs AFTER vmotion? Thank y...
Hi, We are currently running a Proof of Concept with one of our customers and they are reporting random disconnects when in video. The customer reported last week the video disconnected at around 25 minutes and when I investigated the VCS reported "N...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-29-2024 11:23 PM | ||
08-21-2024 10:47 AM | ||
08-16-2024 04:39 AM | ||
08-15-2024 07:49 AM | ||
08-12-2024 12:15 AM |
User | Count |
---|---|
3 | |
1 | |
1 | |
1 | |
1 |