Hi Team,
One of our customer is using VCS control and expressway and Tandgber c20, c40 and c60 codecs and sx80 codecs registered to VCS. I need to migrate the endpoints to CUCM version 10.5. software version currently used by the codecs is given below.
C20: TC 4.2.1
C40: TC 5.1.4 / TC 5.1.3
c60: TC 7.3.3
SX80:TC 7.3.3.
As per the link http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html the minimum and recommedend verion of the endpoint is given below.
|
Cisco TelePresence SX Series
|
TC 7.1.1 (Minimum)
|
TC 7.2 (Recommended)
|
|
Cisco TelePresence Integrator C Series
|
TC 7.1.1 (Minimum)
|
TC 7.2 (Recommended)
|
What is the best approach to migrate the endpoints to CUCM? c20 and c40 codec software is not comapabtible with cucm 10.5.
do we need to upgrade the software of the endpoint while the system is regsitered to VCS and then migrate to CUCM? It would be great if someone can provide their valuable inputs.
Krishna.
