View Call Manager Call Real-Time?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-23-2012 09:33 AM - edited 03-19-2019 05:46 AM
Cisco Forum Members:
Is there a way to view Call Manager calls real-time?
The application is that someone picks up an IP Phone, dials an access code to overhead paging, then fails to properly hang up the call as which point their subsequent conversation is broadcast over the paging speakers. Can it be determined which Directory Number is connected to the paging port (a router FXO/FXS port)?
Thank you.
Dan
- Labels:
-
UC Applications
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-23-2012 12:02 PM
The easiest way would be to look in the GW that houses the paging port with the show call active voice command. For more info look at this link, http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008019ab88.shtml
Please remember to rate all useful posts.
Sent from Cisco Technical Support iPhone App