VXML gateways for CUCM MVA

[Elliot Dierksen]

I have a customer running CUCM 12.5 that wants to implement MVA (mobile voice access). I did some searching and see that the ISR 4K does not support VXML, so it won't do that. I was trying to search in feature navigator for 'VoiceXML For Cisco IOS', but nothing comes up. Are there any current gateways that could be used with MVA? They have some old 2900's that we could drag out, but I rather not put something going end of support back into production.

[b.winter · Accepted solution]

Don't know if you read this, but according to the feature config guide, Gateway config is not mandatory anymore:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/featureConfig/cucm_b_feature-configuration-guide-1251/cucm_b_feature-configuration-guide-1251_chapter_010.html

 

[Elliot Dierksen]

Doh, stupid documentation! My bad. I just assumed that the gateway VXML stuff was still required. Thanks!