01-05-2018 02:21 PM - edited 03-19-2019 01:02 PM
I've gotten a bit confused on what actual file needs to be installed / uploaded with regards to Phone Firmware. For example for a Cisco 7960 (Both SCCP and SIP requirements):
And as a side question if I have a 7960 phone and want to a CUCM as a SCCP phone, then install it as a SIP in either this same CUCM, or another CUCM, or a CME setup can someone point me to a doc or example on steps?
thank you
01-06-2018 11:06 PM
Hi,
Below are my comments:
1. COP files are used on CUCM whereas the ZIP file or the unzip files with .loads extension is used on CME.
The below guide can be referred for CME:
For firmware installation/upgrade you can refer to the link below:
2. If you have to convert the same phone from SCCP to SIP, you need to refer to the link below:
Let me know in case you have any questions.
Regards,
Aseem Anand
(Please rate if useful)
01-08-2018 10:36 AM - edited 01-08-2018 10:38 AM
Thank you
01-08-2018 05:19 PM
You welcome. Please rate the useful posts.
Regards,
Aseem Anand
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide