03-19-2017 04:01 AM - edited 03-19-2019 12:14 PM
Hi All,
I am trying to integrate Avaya G450G H.323 to CUCM11v Manager. we created trunk group h.323 in Avaya calling to CUCM11 its working fine, when am calling from CUCM11 to Avaya G450 message "your call can not complete dial please consult your directory". similar issue any one facing.
Ganesh
03-19-2017 07:35 AM
Did you look at the Dialed Number Analyzer to see if the call is expected to route properly?
Is the pattern you are dialing in proper partition and pointing to correct route list --> route group --> GW?
Is Avaya configured properly to accept the call and route to the desired DN?
Are you doing any digit manipulation along the path or should you do any and are not?
03-22-2017 10:09 PM
Thank you for your response Chris,
the issue has been identified and fixed. the issue in signaling-group(avaya) not define trunk group number thats ware the call was not accepting from Call Manager.
its working fine two-way call flow(Avaya-CallManager-Avaya)
Regards
Ganesh
03-23-2017 05:58 AM
Great, thanks for the update.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide