I installed an ISM-300 voicemail module and got it working too. However, the time is incorrect by one hour for the voicemail timestamps. The phones show the correct time. I cannot figure out how to get the ISM to recognize DST. I an ping the CME router from within CUE.
TDC-VMAA# sh ntp ser remote refid st t when poll reach delay offset jitter ============================================================================== *10.110.0.1 18.104.22.168 3 u 210 256 1 0.336 9.002 1.612 space reject, x falsetick, . excess, - outlyer + candidate, # selected, * sys.peer, o pps.peer TDC-VMAA# ping 10.110.0.1 PING 10.110.0.1 (10.110.0.1) 56(84) bytes of data. 64 bytes from 10.110.0.1: icmp_seq=1 ttl=255 time=0.191 ms 64 bytes from 10.110.0.1: icmp_seq=2 ttl=255 time=0.172 ms 64 bytes from 10.110.0.1: icmp_seq=3 ttl=255 time=0.137 ms 64 bytes from 10.110.0.1: icmp_seq=4 ttl=255 time=0.127 ms 64 bytes from 10.110.0.1: icmp_seq=5 ttl=255 time=0.130 ms
--- 10.110.0.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.127/0.151/0.191/0.027 ms, ipg/ewma 0.204/0.169 ms TDC-VMAA# sh clock 16:24:56.161 EST Wed Jul 24 2019 TDC-VMAA# exit
[Connection to 10.110.0.1 closed by foreign host] TDC_CME_Router#sh clock 17:25:00.954 DST Wed Jul 24 2019
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...
To participate in this event, please use the button to ask your questions
Tour of the Real-Time Monitoring Tool
Have any questions about the Real-Time Monitoring Tool?
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to...
This event had place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees will learned how to use it to g...
The purpose of this document is to provide troubleshooting insight into a well-known issue for the IM&P nodes when going to the Presence Topology Page and seeing all the services as Unknown, even though they are started as shown on the ...