cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
385
Views
0
Helpful
5
Replies
Hary_CsC
Beginner

Interface Network Verification failed

Haii

 

Please help
Yesterday I accidentally changed Static to DHCP Server on cusm, after Restart.
can't be opened and after checking on the VM by console there (attach)
"Network Verification failed"

 

I want to it static again, please advise and solution.

Changes hostname.JPG

Screenshot (75).pngScreenshot (76).png

 

Thx

 

1 ACCEPTED SOLUTION

Accepted Solutions

You made it dhcp, so connect a dhcp server to get the Ip. Once CUSM gets the IP u can convert it to static.

Please Rate all useful post :)
If this answered your question, please click "ACCEPT AS SOLUTION" Or If you find this response useful, please mark it as "HELPFUL"

View solution in original post

5 REPLIES 5
Roger Kallberg
VIP Advisor

Your best option is to call TAC and open a P1 SR.

Please rate all useful posts

Haii Kallberg

 

Was there no solution before "open tac"?

 

Thx

Nithin Eluvathingal
VIP Advisor

If the CUCM server vlan doesn't have a DHCP server, configure one and on vlan  interface   configure IP helper address as the DHCP server. The server should take an IP address from the DHCP. 

 

 

 

Please Rate all useful post :)
If this answered your question, please click "ACCEPT AS SOLUTION" Or If you find this response useful, please mark it as "HELPFUL"

Haii Nithin

 

This is CUSM, and I want to make it static. but CUSM cannot be accessed and the VM appears a notification "Network Verification failed"

 

Thx

You made it dhcp, so connect a dhcp server to get the Ip. Once CUSM gets the IP u can convert it to static.

Please Rate all useful post :)
If this answered your question, please click "ACCEPT AS SOLUTION" Or If you find this response useful, please mark it as "HELPFUL"

View solution in original post

Content for Community-Ad

Spotlight Awards 2021