09-26-2007 01:40 AM - edited 03-18-2019 07:52 PM
Yelp!
We are ripping out the PBX and its currently providing ISDN connectivity to our RightFax server.
Calls come into a PRI and get delivered to the Brooktrout TR1034+P4-2B from a card in the PBX.
We've ordered a BRI card for a 3845. At this point we get no connection between the server and router.
Has anyone done this before?
As an added twist, we are setting this up in Germany.
Any input greatly appreciated. We are cutting over on Friday.
Thanks!
-Erik
09-28-2007 07:08 AM
A BRI crossover did the trick! 3 > 5 , 4 > 6.
Easily available if you search Cisco.com
-Erik
10-01-2007 12:48 PM
Erik,
Are you taking on this RightFax project by yourself, or have you found resources to assist you? We are looking for similar resources.
Thanks,
Steve
03-11-2009 11:11 AM
Hi Erik - out of curiosity what BRI card were you using?
11-22-2009 04:49 AM
I have set this up sucessfully using the crossover as mentioned attached is documentation for setting up under H323.
If you are using MGCP enter the commands as detailed in the document under the BRI and also ensure you set the clocking on the E1 connected to PSTN
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0.
show network-clocks
Once you have done this issue no MGCP and then MGCP.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide