Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I was wondering if there was anyone out there who had managed to get any of the following functioning with Cisco CUCM: Audiocodes MP108 and MP124 range of 2,4,8 and 24 Port FXS Gateways utilising the following software. MP108_SIP_F4.60A.043; M...
Hi There,I am after some advice on a Unity Upgrade, I have to carry out an upgrade of a Unity 4.2 server on same hardware it is VM only and running on Win2000. I have CUWL licencing so I can upgrade to either Unity or Unity Connection, I know I need ...
Hi All,Anyone out there answer why Cisco have jumped from CallManager 8.0 to 8.5?I'm looking at finally upgrading my last 4 customers away from CCM 4.x. So far all the upgrades I have carried out I have pushed to CUCM 7.1(3) and then 7.1(5) using CUW...
Hi There,I’d like to order some software for a couple of call manager upgrades and was wondering what the implication of this EoS EoL has on my part numbers. I cannot find part numbers or descriptions for Cisco Unified User Connect Licensing and the ...
So from what I have read the SPA500DS is supported on the SPA5xx phones but only if they are SIP.Can someone confirm if the SPA500DS works with an SPA5xx handset running SIP connected to a UC500?************* Cisco - Poor show on not making this clea...
Hi There,First off ensure you have entered the security password correctly.The RTMT is the primary tool to use when troubleshooting database issues on CallManager 5.x and above. Under thePerformance tab, choose the Performance object, then choose the...
Thanks Guy, this identifies an issue we have been trying to fix for weeksCisco TAC are posting an ES release C2C 7.0.13 so hopefully this will resolve my issue
Hi Kevin,I found this document on MS TECHNET it gives the CUCM config steps for intergration into Exchange 2007 with CUCM 5.1, it's a bit old but general config will be the same in 7.x.I believe that MWI is supported in Exchange 2010.Kind Regards,Sta...
