cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

687
Views
0
Helpful
3
Replies
Highlighted
Hall of Fame Community Legend

Unity Connection with PIMG Bug info

Hello all,

We are running Unity Connection 7.1(3b)su2 - 7.1.3.32900-4 with a couple of PIMG

units running 6.0.SU3.2.002. We get the PIMG's completely locking up at random times.

Sometimes it's a week or two between lockup's. I'm trying to confirm if the Bug fix for this issue

is included in our CUC build? The fixed in versions do not show 7.1.3.32900-4 and I can't seem

to secure this info from the ReadMe's or release notes (maybe I'm blind ).

Fixed-In Fixed-in
8.0(0.193)
7.1(2)ES20
7.1(2.32016.1)
7.1(3)ES3
7.1(3.11001.2)
7.1(3.21900.2)

CSCtb71551            Bug Details

UC with PIMG fails Keep Alive and erroneously places port out of service
Symptom:

Cisco Unity fails 60 second keep alive and regardless of what happens within the next 30 second ack we put that port out of service.

Conditions:

Cisco Unity sends a Keep Alive to each PIMG device every 60 seconds and it expects the PIMG device to respond with an ACK within 30 seconds. If an ACK is not received within 30 seconds, Cisco Unity connection will reduce the Keep Alive interval to 30 seconds so we are able to detect a potential outage quicker. Even though Cisco Unity Connection may receive an ACK within 30 seconds it still places that port out of service.

Workaround:

None

Further Problem Description:

What we expect to happen in this scenario:

Cisco Unity sends a Keep Alive to each PIMG device every 60 seconds and it expects the PIMG device to respond with an ACK within 30 seconds. If an ACK is not received within 30 seconds, Cisco Unity connection will reduce the Keep Alive interval to 30 seconds so we are able to detect a potential outage quicker. Should Cisco Unity Connection fail to receive an ACK after two tries that port is placed out of service.

StatusStatus
Fixed             

Severity Severity
3 - moderate

Last Modified Last Modified
In Last Year        

Product Product
Cisco Unity Connection         

Technology Technology


1st Found-In 1st Found-in
7.1(2)ES1       
           
Fixed-In Fixed-in
8.0(0.193)
7.1(2)ES20
7.1(2.32016.1)
7.1(3)ES3
7.1(3.11001.2)
7.1(3.21900.2)

Cheers!

Rob

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Unity Connection with PIMG Bug info

Per the release notes:

http://www.cisco.com/web/software/282074295/31799/cucm-readme-713bsu2.pdf

Resolved Cisco Unity Connection Caveats in 7.1(3)es22;base ES for 7.1(3b)su2

CSCtb71551  is listed

View solution in original post

Beginner

Re: Unity Connection with PIMG Bug info

Resolution summry from the TAC Service Request assotiacted with this thread:

PIMG firmware upgraded to 6.0SU7. Disabled third-party up-time monitoring device from scanning these PIMG devices.

View solution in original post

3 REPLIES 3
Cisco Employee

Re: Unity Connection with PIMG Bug info

Per the release notes:

http://www.cisco.com/web/software/282074295/31799/cucm-readme-713bsu2.pdf

Resolved Cisco Unity Connection Caveats in 7.1(3)es22;base ES for 7.1(3b)su2

CSCtb71551  is listed

View solution in original post

Hall of Fame Community Legend

Re: Unity Connection with PIMG Bug info

Hi Curtis,

Thanks so much for linking this up for me I don't

think I ever thought to look in the CUCM Readme. I have a TAC

case open and am working with Tim to resolve this issue.

Cheers! And Thanks again!

Rob

Beginner

Re: Unity Connection with PIMG Bug info

Resolution summry from the TAC Service Request assotiacted with this thread:

PIMG firmware upgraded to 6.0SU7. Disabled third-party up-time monitoring device from scanning these PIMG devices.

View solution in original post

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here