The next generation rack infrastructure is now orderable in CCW, including new Cisco R42612 Rack and RP Series Metered Input Power Distribution Units (PDUs). The new rack and PDUs are optimized for Cisco UCS platforms and compatible with Cisco UCS Integrated Infrastructure.
Cisco R42612 is a 1200mm deep 42U industry standard 19-inch rack. With a deeper design than the previous generation R42610 rack, it provides ample room for power, cooling, cable management and serviceability. The new rack comes in two models for installation at customer site:
Cisco R42612 standard rack, with side panels for single and end-of-row deployments
Cisco R42612 expansion rack, no side panels for multiple rack deployments
The RP Series Metered Input PDUs feature phase and section metering, remote monitoring through network communication, ±1% billing grade accuracy, an advanced LCD pixel display, IEC outlet grip plug retention, and a high operating temperature. The PDUs come in seven models:
The UCS drives I have are firmware A005 since we keep them updated with HUU as recommended. The UCS-C22-M3 requires a 9240-8i for ESXi to be able to be installed. We are trying to find an actual use for it. The 9240-8i requires firmware A001 to be on my d...
I don't manage this system directly, but I'm involved in a project where we have a few C220 M5 with a VIC 1457 mLOM adapter installed.The settings for the "External adapters" is greyed out, and my theory at the moment is that the server has a "default ser...
does anyone know a simple way to export server inventory into a .csv file?ssh# show server versionmy goal is to have a easy to ready csv file with running firmware versionswe dont have intersight show server versionServer 1/1:CIMC:Running-Vers:...
I currently have the primary and secondary DNS servers defined in Unity. I'm wondering if there is a way to set a tertiary DNS server. Has anyone found a way to set a third DNS server? For example something like this:set network dns primary X.X.X.Xse...
Hello, I'm setting up a new UCS chassis with some B200M5 blades VIC1440.Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly. Just facing right now an issue for connecting those blade...