Mega raid option does not appear when the server comes to the bios
screen, I see the Megar aid PCI card when I look at the bios but I can
not do in the configuration because all setting is disable. There are
three from this server and they all have the sa...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server
but in CIMC VIC adapter section only one card is listed. i have
installed the cards in slot number 4 & 5. in VIC adapter section only
slot 5 is showing. In PCI adapter i could see tw...
One of the great benefits of deploying Cisco's Container Platform on
Cisco Hyperflex is the ability to get persistent storage for containers
out of the box with minimal configuration. This works well for
containers where you require the data to survive on...
Activate your Data with the Power of UCS Accelerate Deep Learning with
the UCS C480 ML M5 Rack Server designed for AI and ML. Learn more about
how Cisco AI/ML computing systems and the UCS C480 ML server deliver
Valuable insights Proven solutions Increase...
Cisco is pleased to announce the release of UCS Manager 4.0(1) and Cisco
IMC Software 4.0(1) this week. These releases provide support for new
hardware platforms, security vulnerability fixes, additional
accessories, and more. Cisco UCS Manager 4.0(1) int...
Anyone else like pioneering? Trying new things? Tackling problems head
on? Let's be honest, if it was easy, it wouldn't be worth it. I love my
job and being able to overcome new challenges (almost daily) is
extremely rewarding. Yesterday was no different....
Last year I wrote about automating Red Hat Linux installations using
VMedia policies. Today we'll talk about a brand new way to install
Windows Operating Systems using the same method. This method has not
been well documented in the past and presents a br...
Are you headed to Orlando between June 10-14 for Cisco LIve? Are you
looking for exclusive roadmap sessions to get some insight into what
Cisco has coming down the line? If so then look no further, as the Cisco
Customer Connection Program has you covered!...
We are pleased to announce the general availability (GA) of Cisco UCS
Director 6.6 starting April 30th 2018. Following are Cisco UCS Director
6.6 key features: UCSD 6.6 key features include:Intersight device
connector: This feature enables Cisco UCS Direc...
Cisco is pleased to announce the release of UCS Manager 3.2(3a) and
Cisco IMC 3.1(3a) today. These releases address critical security
vulnerabilities, provide support for new hardware and accessories, and
extend diagnostic capabilities.UCS Manager 3.2(3) ...
Update - January 20, 2018Intel released a statement today with
additional information about a reboot issue associated with the
microcode update for Broadwell, Haswell, Skylake and other processors,
and is advising customers to not deploy select versions o...
Back in July we announced Project Starship along with a Tech Preview of
a product that would later be launched as Cisco Intersight. While it is
not common that we release an internal project codename, we felt that in
the spirit of the original ‘Project Ca...
Cisco is pleased to announce the release of the IMC Platform Emulator
v3.0(3f). The IMC Platform Emulator (IMCPE) gives users an in-depth
understanding of the standalone rack server IMC framework, without the
need for physical hardware. Users get a “look ...
The Quality of Service (QoS) setup in FlexPod Datacenter has always been
done with simplicity in mind and as a base for more advanced
configuration when necessary. Because the FlexPod IP data network uses
Cisco UCS Fabric Interconnects (FIs) and Cisco Nex...
Cisco has released UCS Manager 3.2(2) which is available on Cisco.com.
UCS Manager 3.2(2) provides support for: Cisco UCS B480 M5 servers and
accessoriesCisco UCS C480 M5 servers and accessoriesSupport for Secure
Encrypted Drives (SED) for Hyperflex M5 se...
The UCS drives I have are firmware A005 since we keep them updated with HUU as recommended. The UCS-C22-M3 requires a 9240-8i for ESXi to be able to be installed. We are trying to find an actual use for it. The 9240-8i requires firmware A001 to be on my d...
I don't manage this system directly, but I'm involved in a project where we have a few C220 M5 with a VIC 1457 mLOM adapter installed.The settings for the "External adapters" is greyed out, and my theory at the moment is that the server has a "default ser...
does anyone know a simple way to export server inventory into a .csv file?ssh# show server versionmy goal is to have a easy to ready csv file with running firmware versionswe dont have intersight show server versionServer 1/1:CIMC:Running-Vers:...
I currently have the primary and secondary DNS servers defined in Unity. I'm wondering if there is a way to set a tertiary DNS server. Has anyone found a way to set a third DNS server? For example something like this:set network dns primary X.X.X.Xse...
Hello, I'm setting up a new UCS chassis with some B200M5 blades VIC1440.Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly. Just facing right now an issue for connecting those blade...