Cisco is pleased to announce the release of UCS Manager 4.0(1) and Cisco IMC Software 4.0(1) this week. These releases provide support for new hardware platforms, security vulnerability fixes, additional accessories, and more.
Cisco UCS Manager 4.0(1) introduces support for the fourth generation of UCS Fabric Interconnects (FI), the 6454 FI. This Fabric Interconnect is a replacement for the 6246 Fabric Interconnect. It provides 40 ports of 10 or 25Gb Ethernet, 8 unified ports of 10/25Gb Ethernet or 8/16/32Gb Fibre Channel, plus 6 ports that support 40Gb or 100Gb Ethernet. This Fabric Interconnect will be helpful for customers who want to take advantage of 25Gb Ethernet or 32Gb Fibre Channel connections for increased bandwidth for key applications.
Both Cisco UCS Manager 4.0(1) and Cisco IMC 4.0(1) also provide support for the fourth generation Virtual Interface Card (VIC) known as the 1400 series VIC. The VIC 1400 series VICs are well matched with the 6454 Fabric Interconnects and offer 10/25Gb Ethernet for UCS C-Series and S-Series servers and 10/40Gb Ethernet for UCS B-Series servers. The VIC 1400 series cards offer additional support for offloading and other performance enhancing features, as detailed in the blog at https://blogs.cisco.com/datacenter/fast-flexible-new-4th-gen-fabric-interconnect-and-vic.
Cisco UCS Manager 4.0(1) and Cisco IMC 4.0(1) also add support for the new Cisco C4200 Series Rack Server Chassis that supports two to four C125 M5 Rack Server Nodes in a 2U chassis. The C125 M5 server is the first Cisco UCS server that offers the AMD (R) EPYC(TM) processor. The C4200 Chassis and C125 M5 Rack Server Nodes are ideal for organizations that are looking for high density compute.
In addition to these key new platforms, Cisco IMC 4.0(1) and UCS Manager 4.0(1) add support for a S3260 SIOC, additional peripherals, and additional software enhancements. These releases will be supported by Cisco Intersight, UCS Director, and other existing tools in the UCS management ecosystem. More details can be found in the UCS Manager 4.0 Release Notes and the Cisco IMC Software 4.0(1) Release Notes.
Finally, both Cisco IMC Software 4.0(1) and UCS Manager 4.0(1) address numerous defect fixes and security vulnerabilities. In particular, these release include updated microcode from Intel that helps mitigate Spectre variants 3A and 4 as well as the L1 Terminal Fault vulnerabilities when used with the appropriate operating system and/or hypervisor patches. Additional details can be found in the Cisco Security Advisories (3A/4 and L1TF) and the release notes.
I have a few rack-mount servers (C220 M3) spread around our data center, with Flash based CIMC GUI. To get around the Flash problem, I was thinking about hocking them up to a UCS manager (UCS 6248UP: which uses HTML5 instead of Flash). What is t...
I am having some strange problem in my cisco ucs 240 m5. There are total of 24 disk installed on the server. Every thing was good until yesterday. 4 hardisk (SAS) suddenly went missing from OS and CIMC. Upon checking the server the led is ok(green and no ...
I'm attempting to bind a service profile to a new service profile template, but I'm receiving the following error: "not enough resources overall...cannot derive MAC address from virtualized port".The template uses a LAN Connectivity Policy that defin...
I moved a pair of FIs from a DR data center and was hoping to make use of them. But I noticed warningsabout ethernet port usage being in grace period. Will the ports stop working if in "grace period" state?Perhaps the engineer who installed these just nev...