About Migration Cisco UCS 6200 to 6400 Series Fabric Interconnects

[masa-yasuhara]

Hi All

When migrating from UCS fabricInterConnect6296 to UCS fabricInterConnect64108,
When migrating from FI A: Primary / FI B: Subordinate to FI A: Subordinate / FI B: Primary (connect local-mgmt to FI A and execute “cluster lead b” ), and then perform step 2 or later in the following guidelines If I do this, do you know if I can do it correctly?

●Migration Guide for Cisco UCS 6400 Series Fabric Interconnects
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Fabric-Interconnect-Migration/4-1/b_ migrating_from_6200_to_6400_4_1/b_Migrating_from_6200_to_6400_4_1_chapter_011.html

Thank you,
Yasu

[Kirk J]

It is not clear what your actual question is...

Kirk...

[Riaan van Niekerk]

Your link did not work for me. The closest match I could find was

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Fabric-Interconnect-Migration/4-2/b_migration_guide_for_cisco_ucs_fabric_interconnects_4_2/m_migrating_from_6200_to_64108.html#task_i25_zkc_zdb assuming UCS 4.2. 

If you are trying to switch the cluster lead, your command should work. If you want to know about changing the cluster lead, see video CIsco UCS Manager - Switch Over Fabric Interconnect Cluster Lead 

If this does not solve or help with your issue, please try reformulate your question.