I'm unable to continue installing the Red Hat Enterprise Linux RHEL 8.4 operating system when the system is stuck on black screen after reboot. I am using vKVM from CIMC and booting from vKVM-Mapped vDVD. As part of troubleshooting, I came across thi...
Forum Posts
Hi experts, TLDR; How do I get the same information as shown in the screendumps below (of a UCS Chassis managed by UCS Manager) for our sparkling new UCS-X which can only be managed in Intersight? Specifically: How much power is being consumed/suppli...
I have a UCS C series server and its serial console is connected to a KVM switch. I SSH to the KVM switch to access UCS server console to try to get into CIMC utility during server bootup...But I typed CIMC password wrong multiple times and CIMC util...
Hello,I am working on some legacy gear which we do not have support for but are not ready to decommission. Two questions:Questions 1:Our FI's and blade are running on older firmware: 4.0(4d)Which does appears does not support 7.0.3, but is this irrel...
All, We have deployed many VMware vSphere / vSAN clusters over the years on UCS M5 and M6 hardware. In those cases, the Cisco HBAs were always on the VMware vSAN HCL. In the case of the UCS M7 series, the only HBA available is the UCSC-SAS-T-D, and...
After upgrading 7.0.1 to 8.0.1 I see this message: BIOS_FIRMWARE_TYPE_WARNING: legacy boot detected ..... Not sure if I can ignore it or if should I change BOOT to UEFI?
Resolved! Fabric Evacuation in IMM
We have a few domains of 6536 FIs managed by Intersight. We want to move the FIs in one of our domains in the rack, which will cause a brief outage. I think that enabling fabric evacuation before shutting down an FI before moving it would be the wa...
Hello. I our Organization we have Cisco UCS C240 M5S servers with these sw installed: Firmware Version: 4.2(3i)ESXi Version: 7.0 Update 3i Currently the latest custom version of ESXi 7.0 available for download is 7.0 Update 3o (File name: "VMware-ESX...
Hello,We are going to setup X series newly in one of our locations. Just wanted if there are any best practices to be followed and also need to know if this has to be set up in UCSM or IMM Mode as the datasheets for X series 9508 Chassis are having M...
We have a vnic template that was originally setup as a Initial Template by mistake, can this be changed to an updating template without issue? We are also in the process of planning to migrate from a L2 disjointed deployment to a single VTP domain. ...
Which VMWARE license is to be bought with cisco ucs220 to build a vmware vsan certied server solution Server is Cisco UCSC-C220-M6S UCS C220 M6 Rack w/o CPU, mem, drives, 1U wSFF HDD backplane Each Server has 2x UCS-CPU-I6326 Cisco Intel Xeon Gold...
Hello there,We would like to upgrade our ESXI version from Hyperflex Connect because we understand that it is recommended way to upgrade both hyperflex firmware and VMware ESXI version from Hyperflex connect. But, I have a little confusion about the ...
Hello, team! Doubtful, with version 5.5, if you install it with vcenter 8.01U, the integration is transparent, even without the plugin? VMware local plugin architecture: Support is limited to vSphere versions 6.5, 6.7, and 7.0. For more information, ...
Resolved! Cisco IMC refusing connections on C220M4
Hello everybody, I'm working on UCS C-series for years through IP Telephony implementation (BE6M and UC on UCS etc.) I'm facing a kind of issue with the UCS C220M4. Our client has a BE6M deployment (the server is C220M4), when we power on the server,...
One of my C240 M4, not sure what did I modify, I am not able to add any user define macros from KVM. I need to map .iso and use F6 to boot from there, Anyone know how to fix this issue? Thanks,
