05-06-2015 11:51 AM
Cisco Unified Computing System (UCS) Mini Architecture, Troubleshooting and Upgrade Ask the Expert Continuing Discussion
(Live Webcast May 12, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
Ask questions from Tuesday, May 12th, 2015 to Friday, May 22, 2015
The Cisco Unified Computing System™ is a next-generation data center platform that unites computing, networking, storage access, and virtualization resources into a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility.
The system integrates a low-latency, lossless 10 Gigabit Ethernet unified network fabric with enterprise-class, x86-architecture servers. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain.
In the upcoming session we will cover the UCS Mini architecture, troubleshooting and upgrade procedure.
Featured Speakers
Avinash Shukla is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has more than 7 years of total experience. He has worked on a wide range of Cisco data center products such as Cisco UCS, Cisco Nexus 1000V, Cisco Invicta and Cisco Collaboration technology. He also holds a CCIE in Data Center & Voice
Manas Kumar Nath is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has more than 9 years of experience. He has worked on a wide range of Cisco data center products such as Cisco UCS, Cisco Nexus 1000V, Nexus 1110. He also holds VCP5 and RHCE certifications.
Sandeep Kumar is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has over seven years of experience. He has worked on a wide range of Cisco data center products such as Cisco UCS, Cisco Nexus 1000V, ACE Load Balancers. Sandeep also holds RHCE certifications.
Find other https://supportforums.cisco.com/expert-corner/events.
**Ratings Encourage Participation! **
Please be sure to rate the Answers to Questions
05-18-2015 08:54 AM
Can you connect the UCS emulator to physical servers?
thanks
05-19-2015 05:10 AM
Hi Fernando,
UCS Emulator are software only and cannot be connected to the physical servers.
05-18-2015 04:13 PM
How is the traffic switched between the blades in UCS mini?
05-19-2015 05:05 AM
Hi Mariana,
Thanks for your question. At the moment traffic switching between blades in UCS Mini is same as in case of classic UCS.
- For traffic between blade vnics which are pinned to the same FI-IOM the switching happens at the corresponding FI-IOM.
- For traffic between vnics which are pinned to different FI-IOM it would be switched outside the FI-IOM at the upstream.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide