Hi,
I have the a chassis, that included the B200 M1 M2 M3 .... I want to promote the maximum hardware specification ....
Would you mind help to verify the maximum specification as below: (Actually, I cannot search the B200 M1 datasheet to talk about that through the Internet. Is it EOL, so the related doc deleted?)
| Maximum |
CPU Core (Total) | RAM Core (Total) | SATA/SAS Hard Disk
GB (Per) | SSD Hard Disk GB (Per) |
B200 M1 | 2 x 5500 or 5600 series processors (12 Cores) | 192 (16-GB per) | 1 TB | 1 TB |
B200 M2 (N20-B6625-1) | 2 x 5500 or 5600 series processors (12 Cores) | 192 (16-GB per) | 1 TB | 1 TB |
B200 M3 (UCSB-B200-M3) | 2 x 5500 or 5600 series processors (12 Cores) | 768 (32-GB per) | 1 TB | 1 TB |
Any wrong in this table?
SATA comparing SAS different is Speed (6Gb <-> 3Gb)? Speed (5400 rpm <-> 7200 rpm)?
If support the SATA as 1TB also support SAS & SSD as 1TB?
