10-23-2012 02:57 PM - edited 03-01-2019 10:42 AM
I'm trying to upgrade the memory on a B230 M1 blade but the memory has gone EoL. can i use the memory for the B230 M2 blade? part# UCS-MR-2X082RX-C=
Solved! Go to Solution.
10-23-2012 05:51 PM
You are looking for 2x8Gb Dimms? You will want to look at part A02-M316GB3-2 as it is slated as the A02-M316GD5-2 replacement.
EOL/EOS for the Cisco 16GB DDR3-1333MHz RDIMM/PC3-10600/2x8GB 2R Kit
http://www.cisco.com/en/US/prod/collateral/ps10265/ps10280/end_of_life_c51-685564.html
Thank You,
Dan Laden
Need assistance with an implementation?
10-23-2012 05:51 PM
You are looking for 2x8Gb Dimms? You will want to look at part A02-M316GB3-2 as it is slated as the A02-M316GD5-2 replacement.
EOL/EOS for the Cisco 16GB DDR3-1333MHz RDIMM/PC3-10600/2x8GB 2R Kit
http://www.cisco.com/en/US/prod/collateral/ps10265/ps10280/end_of_life_c51-685564.html
Thank You,
Dan Laden
Need assistance with an implementation?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: