cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3483
Views
0
Helpful
17
Replies

Boot from SAN problem

mhyde
Level 1
Level 1

I am having a problem getting boot from SAN working.  I have a UCS B series.  I have configured fiber channel and it is up and working.  If I boot from a vmware CD, I can see the SAN and install to the proper LUN.  When I try to setup the system to boot from it, I get an access failure.  Any ideas?

adapter 1/7/1 (fls):5# lunlist

vnic : 15 lifid: 4

  - FLOGI State : flogi est (fc_id 0x0f0041)

  - PLOGI Sessions

     - WWNN 21:00:00:24:ff:2f:fa:dc WWPN 21:00:00:24:ff:2f:fa:dc fc_id 0x0f0020

       - LUN's configured (SCSI Type, Version, Vendor, Serial No.)

           LUN ID : 0x0004000000000000  access failure

       - REPORT LUNs Query Response

           LUN ID : 0x0000000000000000

  - Nameserver Query Response

     - WWPN : 21:00:00:24:ff:2f:fa:dc

zoneset name zs_vsan100 vsan 100

  zone name zone_vsan_100 vsan 100

    pwwn 20:00:00:25:b5:10:10:01

    pwwn 20:00:00:25:b5:10:10:02

    pwwn 20:00:00:25:b5:10:10:03

  * fcid 0x0f0041 [pwwn 20:00:00:25:b5:10:10:04]

  * fcid 0x0f0020 [pwwn 21:00:00:24:ff:2f:fa:dc]

The SAN is a freenas server.

17 Replies 17

Managed to find a way to change the nwwn, but made no difference:

INTERFACE VSAN FCID PORT NAME NODE NAME
--------------------------------------------------------------------------------
fc1/10 100 0x0f0020 21:00:00:24:ff:2f:fa:dc 20:00:00:24:ff:2f:fa:d0
fc1/11 200 0x5c0000 21:00:00:24:ff:2f:fa:dd 20:00:00:24:ff:2f:fa:d0

adapter 1/7/1 (fls):1# lunlist
vnic : 15 lifid: 4
- FLOGI State : flogi est (fc_id 0x0f0041)
- PLOGI Sessions
- WWNN 21:00:00:24:ff:2f:fa:dc WWPN 21:00:00:24:ff:2f:fa:dc fc_id 0x0f0020
- LUN's configured (SCSI Type, Version, Vendor, Serial No.)
LUN ID : 0x0000000000000000 access failure
- REPORT LUNs Query Response
- Nameserver Query Response
- WWPN : 21:00:00:24:ff:2f:fa:dc

vnic : 16 lifid: 5
- FLOGI State : flogi est (fc_id 0x5c0021)
- PLOGI Sessions
- WWNN 21:00:00:24:ff:2f:fa:dd WWPN 21:00:00:24:ff:2f:fa:dd fc_id 0x5c0000
- LUN's configured (SCSI Type, Version, Vendor, Serial No.)
LUN ID : 0x0000000000000000 access failure
- REPORT LUNs Query Response
- Nameserver Query Response
- WWPN : 21:00:00:24:ff:2f:fa:dd

did you check the storage interop matrix ?

http://www.cisco.com/c/en/us/products/servers-unified-computing/interoperability.html#~storage

I don't see this array on the list ?

I would open a TAC case ! You need a detailed FC trace !

Actual Boot order doesn't show any lun ?

Do you have 2 separate fabrics (2 MDS, dual controller storage).

Could it be, that the boot policy references the wrong fabric pwwn ?

Do you see any errors on MDS ? show logging log....

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card