cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1211
Views
0
Helpful
3
Replies

C220M3 DIMMs marked as "Ignored/Disabled"

Gordon Ross
Level 9
Level 9

I've got a C220M3 which is reporting four DIMM slots as Disabled (or Ignored/Disabled depending on where you look)

I've moved DIMMs around, and the fault stays with the same slots. As the memory controllers nowadays are on the CPU, I assume the CPU is unwell and needs replacing?

GTG

Please rate all helpful posts.
3 Replies 3

Kirk J
Cisco Employee
Cisco Employee

The memory controllers are on the CPU, but the CPUs are rarely the issue.  It is more likely an issue with the systemboard.

When you swapped DIMMs, was it from the other CPU DIMM banks?

Thanks,

Kirk...

Yes

Gordon.

Please rate all helpful posts.

You're going to want to open a case with TAC for that.

Kirk...

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card