07-08-2018 09:47 PM - edited 03-01-2019 01:37 PM
Hi All,
our admin User is locked, is there a way to unlock the user? I can't find anything about that in the User Guide :(
Thanks
Alex
Solved! Go to Solution.
07-09-2018 03:26 AM - edited 07-09-2018 08:08 AM
admin password reset
1) Log into the system console (shell) as a "root" user.
2) Change directories to "/opt/infra"
.. cd /opt/infra
3) run the local script "dbPwdReset.sh"
../dbPwdReset.sh
4) You will see an error then an info message stating "'admin' password is reset".
5) Now try to log into the IMC Supervisor appliance via the web GUI with the username/password of "admin/admin".
Thanks,
Kirk...
07-09-2018 03:26 AM - edited 07-09-2018 08:08 AM
admin password reset
1) Log into the system console (shell) as a "root" user.
2) Change directories to "/opt/infra"
.. cd /opt/infra
3) run the local script "dbPwdReset.sh"
../dbPwdReset.sh
4) You will see an error then an info message stating "'admin' password is reset".
5) Now try to log into the IMC Supervisor appliance via the web GUI with the username/password of "admin/admin".
Thanks,
Kirk...
07-09-2018 03:29 AM
Awesome!
Thanks Kirk
Cheers
Alex
08-21-2018 02:04 PM
Hey Kirk,
I've tried these steps to reset the admin password, I get the reset message but I still cannot logon with admin/admin at the web gui.
Any other ideas?
Thanks,
Scott
08-21-2018 03:22 PM
admin/password is the typical default password on a CIMC :-)
HTH!
j
08-22-2018 05:26 AM
Ashley, this is IMC Supervisor 2.0, not server hardware.
Thanks,
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide