Cisco UCS Components, how to find temperature thresholds?

[Adrian Sutton]

How do I find the temperature thresholds of components within a Cisco UCS environment?

For example we have 4 Fabric Interconnects and 2 run at approx 42 degrees Celsius on the motherboard while 2 run at around 48 degrees Celsius.  I would like to know the Upper Thresholds when alerting would start.

I found the following post which shows server thresholds but not sure how to fine for the Fabric Interconnects or other components

UCS CPU temperature thresholds | Unified Computing | Cisco Technical Support Forum | 6011 | 11621236

Is there any documentation which shows all the default settings for temperature thresholds of all components

Many Thanks

Adrian

[Adrian Sutton · Accepted solution]

The command is

show environment from nxos cli

On a Fabric Interconnect use ssh to FI A or B

connect nxos

show environment

This will display temperature of FI's and ranges for alerts

[heesharm]

what is A and B here ?