Cisco UCS VIF Paths Admin down

[alexanderfuchs2]

Hello i have a problem with cisco ucs. I deployed a Service Profile with vlan and vsan. After that i cant see the wwpn's on my San Switches. In the Server menu on the vif tab i found the Problem, the fc1 Connection has the vif Status "Admin down". I searched the whole Internet and didnt found anything how to fix this Status. I attached some screenshots. Could you help me?

Thank you!

[Walter Dey]

I am convinced, that your problem is that the link between FI and fc switch is not up ! please check that and post the additional information.

- what brand of fc switch ?

- is NPIV mode enabled on the fc switch ?

- is FI in FC EHM ?

- are you using different VSAN for fabric A and B (hopefully not equal 1)

Walter.

[Manuel Velasco]

Hi Alex,

Do you  have an OS already install on the server? If not try installing the os

Is the server power on?  Make it is power on.

on the vHBAs is the vsan an existing vsan? Want to make sure the vsan is accessible to your upstream switch.

What version of UCSM are you running?   if you are running 2.2 make sure that you vhbas are not disabled. (see attachment)