06-12-2019 03:16 AM
Is it possible to built cluster of 2 Different Server nodes under the same Hyperflex?
For example 3 Server Nodes of HXAF240C-M5SX and 3 Server Nodes of HX-UC-C220M5SX work under same hyperflex?
06-12-2019 03:36 AM
You cannot mix those models of servers as converged storage nodes, as they have very different configurations for storage (i.e. 24 drives vs 10.
In later versions, you can mix M4/M5 units within the same line (i.e. 220, 240).
Kirk...
06-12-2019 05:00 AM
Hi,
Thanks for your reply. I didn't mean to converged the storage of 2 Different Nodes model together. I mean to keep both Nodes Cluster (HXAF240C-M5SX) & (HX-UC-C220M5SX) separately from each other under the single Hyperflex domain.
I hope this work fine?
Hyperflex Version: 3.5(2a)
UCS Version: 4.0 (1C)
06-12-2019 05:11 AM
You can mix 240m4/240m5 or 220m4/220m5 which will have same drive capacity.
You cannot mix 240 and 220s as they are very different configurations.
Kirk...
06-14-2019 06:03 AM
@jahanzaib amin wrote:
Hi,
Thanks for your reply. I didn't mean to converged the storage of 2 Different Nodes model together. I mean to keep both Nodes Cluster (HXAF240C-M5SX) & (HX-UC-C220M5SX) separately from each other under the single Hyperflex domain.
They cannot be in the same HyperFlex domain. You have to create a separate HX cluster, but you can use the same UCS FI's. You can have up to 8 separate HX clusters on a single pair of FI.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide