Unified Computing System Discussions

Hi I have an issue with a b200 m2 after a power failure the issue is : problem identifying server in slot 2ID: 9011341Code: F0157_________________________________________________________________ [FSM:STAGE:REMOTE-ERROR]: Result: unidentified-fail Co...

I have a vNIC template for VMware.  The vNIC template has a bunch of VLANs that map to port groups on ESXi servers.  I have those vNIC templates in my service profile template that I have used to create some service profiles for ESXi servers.   I unb...

I have a UCS C220 M4S that is managed by USCM.  The server was built with (4) drives in a RAID10 config.  The Local Disk Configuration Policy in the service profile is RAID10 Mirrored and Striped, Protected.   I have added (2) additional drives that ...

Anyone knows when Cisco will update their custom iso image of ESXi 6.5? Vsphere 6.5 GA was released today.

I have a L2 disjoint setup (FIA and B) and vlans 10 and 20 pinned to portchannel 2 and vlans 110 and 120 pinned to pc 3. I have 2 vnic from updating template one on FIA and one on FIB. The vnics have vlan 10 and 20. I read UCS sees the  vlans for the...

Hi   We are looking for the steps to provide full access for a Sub organization with UCS and read only only access to all other organizations and settings / configurations. Can someone help us   Thanks in advance

Hi all, i'm searching which cpu model is employed in UCS 6248UP Fabric Interconnect . Anyone can lead me to the right documentation to retrieve this information? thanks

I am trying to build a 3.1(2e) UCS cluster using two UCS "Mini" FI's (6324) I run through the initial console configuration on the first one. No problems.   I switch to the second FI and I get this:   Installer has detected the presence of a peer Fab...

Hi,   I have a remote ISR 4321 with the UCS-E module UCS-EN140N-M2/K9.  I know I need to upgrade the BIOS and CIMC version (to huu_3.2.6.v3.iso), but I do not find a way to get into the CIMC / BMC, certainly not via the GUI, but neither via the CLI s...

Hi, Recently upgrade our test Fabric Interconnects and 5108 Chassis to 3.1(2e) and since this the 5108 Chassis fan's have all been running at full speed (9372).  I can see there are bugs for other versions for fan speed but can't find one for this ve...

Good morning,I have Cisco UCS 6248UP 48, Cisco UCS C220, Cisco UCS B200 M4 Blade Server, and Cisco UCS 5108 Blade Server Chassis that I want to monitor with Nagios.I have my Nagios 4.4.1 server where I already have Cisco switches and other equipment ...