Clustering UCS 9508 Chassis x UCS 5108 using Fabric Interconnect 6454

[JRD]

We have a setup with a pair of fabric interconnects 6454 and few UCS 9508 Chassis running on UCSM mode.

We are planning to add another Chassis which is UCS 5108 w/ M5 blade servers.

Is this possible to be setup, and if so, can you share a document on configuring.

[Kirk J]

See page 55 of https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/6400-specsheet.pdf'

Assuming you have compatible IOMs in your 5108 chassis and compatible SFPs, don't see this being a problem.

Kirk...