cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1205
Views
0
Helpful
3
Replies

CMOS Replacement on UCS C210 R2

marcus.terry04
Level 1
Level 1

Hi All,

 

Just a quick question. I will be replacing a failed CMOS Battery on my Cisco UCS C210 server. My main question is will there be any loss of specific configuration settings besides the typical Bios settings?

2 Accepted Solutions

Accepted Solutions

jchavesd
Level 1
Level 1

Marcus, 

 

      No. There should not be any other configuration affected by performing such action. 

 

 

View solution in original post

Saurabh Kothari
Cisco Employee
Cisco Employee

Hello Markus,

I totally agree with jchavesd.

however kindly make sure to replace the battery only with the same or equivalent type recommended by the manufacturer.as there is danger of explosion if the battery is replaced incorrectly.

thought basics but I wanted to bring this to your notice :)

I believe you have got the replacement battery through TAC.

thanks,

-SK

 

View solution in original post

3 Replies 3

jchavesd
Level 1
Level 1

Marcus, 

 

      No. There should not be any other configuration affected by performing such action. 

 

 

Great, thanks everyone

Saurabh Kothari
Cisco Employee
Cisco Employee

Hello Markus,

I totally agree with jchavesd.

however kindly make sure to replace the battery only with the same or equivalent type recommended by the manufacturer.as there is danger of explosion if the battery is replaced incorrectly.

thought basics but I wanted to bring this to your notice :)

I believe you have got the replacement battery through TAC.

thanks,

-SK

 

Review Cisco Networking for a $25 gift card