Hello,
I try to deploy ESX5.5, ESX 6.0 or ESX 6.5 on UCS-E140S-M2 in ISR4451. I succeed to deploy the iso file by the KVM. AFter ther first reboot, I need to configure the ESXi IP adress to deploy the OVA and manage it.
During this first reboot, the ESXi startup stop with the message " Multiboot could not setup the video system". Due to that, I'm not able to configure the configuration of the ESX layer (Ip, password...).
From VMWare web site, it seems that issue is due to resolution of the KVM (not 1024*768).
UCSE NAME: "SM subslot 1/0", DESCR: "UCS-E140S-M2/K9 - UCSE SW Module"
PID: UCS-E140S-M2/K9 , version CIMC 3.1 and Bios 1.5.0.6
I have no other screens connected to UCSE. I tried to disable or enable local server video in CIMC interface
The UCSe has been validated as supported by VMWARE for 6.5. I used the Cisco custom file.
Do you know how to solve this issue and finalize the ESX 6.5 config on UCSe ?
