Hello,
I'm working on several 5Ks, each having several FEXs attached.
I need to select a lot of "notconnected" ports, place them in a non routed VLAN, and shut them down.
The problem: The ports are all over the place. The Nexus range feature is...
I have deleted and created a new UCS In-Band IP pool and I need the deployed Global service profiles to get a new IP from this new pool. I know this can be done in WebInterface (GUI) by clickeing on the "reassign" button, but since I have more than 3...
I'd like to change the setting "Power State" in a Service Profile Template. While I can change nearly every other aspect of the template, I can't find this in the UCS Manager GUI. Is this an immutable decision while creating the template? Can I chang...
Hi
We are in the process of migrating all servers / Microsoft Hyper V 2016 from Dell blade / Brocade SAN switches to UCS 6248/ B 200 M4 / MDS 9148 S switches / EMC VNX SAN.
We created the service profiles to boot from SAN. With the initial prepa...
Hello everyone! Well, i have always had a doubt regarding to upgrade the servers. If one server is turn-off and then assign a service-profile (with host package firmware in default) to it, will it upgrade before to work? Should i configure that polic...
I recently downloaded the UCS PE to prepare for the deployment of a UCS solution consisting of:- UCS 5108 Blade Server Chassis (with 2x Fabric Extender Cisco UCS 2208XP)- UCS 6296UP 96-Port Fabric Interconnect Appliances- UCS SmartPlay Select B200 M4...
HI,
I want to upgrade UCS C-series standalone rack mount servers to 2.0(13n ) from 2.0(3f), does any one know the process for the same.
Please clarify.
Thanks,
Dinesh
Hello,
I am just trying to have better understanding of UCS vNIC and it's drivers for ESXi hypervisor.
I cam across 2 different drivers for ESXi hypervisor
1). Native ENIC driver version 1.0.11.0
2). ENIC driver version 2.3.0.14
Can some one sh...
HiFollowing is our current setup. 6248 FIs, 5108 IOMs, B200M4 blades with VIC 1340 connected to N9K & MDS 9148S. We have enabled QoS System class - Gold (Cos - 1, weight 7), Silver (Cos - 2, weight 3), Best Effort (Cos - any, weight 5%) , and FC. QoS...
Hi,
We're using Cisco IMC Supervisor 2.2.0.1 standard.
I've set it up so that servers are divided into three rack groups: "Accounting", "HR", and "Finance."
How can I limit a user so he only has access to the servers in the "Accounting" rack ...
Hey guys,
Got a new UCS system setup in two separate DCs, however the Windows Server 2016 installation is taking in excess of 2 hours to complete on a blade, it seems all parts of the install are going slow (copying files, getting ready for install...
Hello,
I'm a n00b to the Cisco UCS platform.
I have a Cisco UCS 5108 with 4 blade servers, two 6324 Fabric Interconnects (with 8GB SFPs) that should connect to a NetApp 2650 storage (with 16GB SFPs). The storage has been setup, SVM ready, FC ports ar...
Regarding Pin group, in the creation I can define two targets one for fabric A and another for Fabric B, in an example in which vhba is pointing to fabric A, in case of failure it will throw the traffic to the other defined target in the pin group?, ...
Hi
We have 6248 FIs, 5108 IOMs, B200M4 servers, VIC1340 with Windows 2016 Hyper V. The chassis / servers will be in production in another 10 days. We used to perform infra updates through Firmware Auto Install / Install Infrastructure Firware and f...
