Extract serial number HBA ucs c210 m2

[supportxcat]

Hello

I need extract (or show) serial number from my ucs 210 m2. I try:

ucs-c210-m2 / scope chassis

ucs-c210-m2 /chassis # show pci-adapter

Name                 Slot       Vendor ID            Device ID            Product Name

-------------------- ---------- -------------------- -------------------- -------------------------

PCIe Adapter1        1          0x1077               0x2532               Qlogic QLE256x 8 Gbps ...

PCIe Adapter2        3          0x8086               0x10e8               Intel E1G44ET 1 Gbps 4...

PCIe Adapter3        5          0x1000               0x0079               LSI 9261-8i MegaRAID S...

I need the serial number of Qlogic QLE256x 8 Gbps

ucs-c210-m2 /chassis # scope adapter 1

Error: Managed object does not exist, use show command to list valid targets

How I can show the serial?

Thanks

[Robert Burns]

I don't believe the CIMC has access to the adapter (non-Cisco) serial #.  If you want to identify it I believe you'll need to load the SANSurfer CLI into the guest OS to extract this info from the adapter.

If I find another method I'll update the thread.

Regards,

Robert

[Robert Burns]

Another option is to break into the FLASUtil Option ROM BIOS (Ctrl+Q) during the boot sequence.  The utility will give you this informaiton also, without the need to load any OS agent software.

Robert

[supportxcat]

Thanks for your help Robert

I wrote a mail to cisco support with the same problem. I will put the response in the thread

David