Unified Computing System Discussions

Any issues or supportability problems connecting a Cisco UCS FI to a 2960 upstream switch?This will be connected using channeled gig ports with multiple vlans.Thanks!

Ok .. I'm confused ... I'm getting random resets on my IOM modules ... it's always the x/2 IOM that reset and and becomes inaccessible.  What can cause this?                  

Hi,We are the owners of a shiny new UCS system which we plan to use to host a sql cluster, consisting of 2 chassis with 3 blades in each chassis. There is very little advanced customisation at the moment, the vNICs have the windows adapter policy app...

Hi All,I have some problem with my Cisco UCS C200 raid controller. the card may not functioning correctly.the raid controller type that used is LSI MegaRAID 9260-4i can i replace that controller card with different type such as LSI MegaRAID 9260-8i I...

Hello,Just would like to have your thoughts about this solution. From what I've heard it is already possible to do it with vSphere 5...yet I have not seen a lot of information from VMware side...nor a lot of enthusiasm either in Cisco site. I think t...

Does anyone know if there is a way to pass through a USB device through an ESX host to a virtual server via a B200 M2 blade?  We have done this with physical servers before, but have never even had the situation come up with a blade server until now....

We have had 2 hosts lose their network connectivity with no messages or errors reported to UCSM.A restart of the NIC interface within the OS fixes the issue. Both servers have the following spec : B200 M32 x 3.3 GHz Xeon CPU'sVIC1240 CNA AdaptorOne s...

HelloI need extract (or show) serial number from my ucs 210 m2. I try:ucs-c210-m2 / scope chassisucs-c210-m2 /chassis # show pci-adapterName                 Slot       Vendor ID            Device ID            Product Name-------------------- -------...

Dears,We are configuring C220 M3 server for UC applications. RAID configuration was completed with one 8-drive RAID-5 logical volume.ESXi was installed in the virtual drive 0 with 1.903TB being reported.Now when we started deploying OVA files we can ...

Hi ,We have UCS 210 M2 with CIMC 1.4.2. We are getting the Lower Fatal Error for 2 fans & RPM are shown as 0. I couldn't find anything with UCS fault Message reference guide.Thanks in Advance.

I will be replacing a 6120 with a 6296 in the near future.  I have the Upgrading Cisco UCS B-Series Hardware pdf which gives an overview of the process for replacing a 6120 with a 6248.  The 6120 we have has the 6 port 8Gb fiber channel expansion mod...

Hi Cisco Top Guns!!!I have tried to migrate some service profiles between servers M2 (with M81KR) to M3 (with Vic 1240 and Vic 1280) and Windows 2008 R2 recognized the interfaces on M3 as new interfaces. The ghost devices interfaces (old interfaces) ...