cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4155
Views
0
Helpful
6
Replies

How can i configure fence_cisco_ucs with redhat cluster suite

bentech4u
Level 1
Level 1

HI

How can i configure fence_cisco_ucs with redhat cluster suite.

i was trying to configure fencing aganet with red ahat cluster suite

i issued command

#  /usr/sbin/fence_vmware_soap -a 172.22.90.61 -l admin -p duc2Cisco -o reboot

then i got below error:

Failed: You have to enter plug number

Please use '-h' for usage

what is this plug number and from where can i get this plug number.?

I am new to this Cisco UCS, becuase this hardware is provided my some other team and i am the one installing Red Hat cluster suite. I requested fencing agent configuration with Cisco, and that guy dosen't know what is fencing..

please help me, because of this issue, production got delayed

regards,

Ben

6 Replies 6

Brian Morrissey
Cisco Employee
Cisco Employee

Hi Ben,

Are you using fence_cisco_ucs or fence_vmware_soap?  For fence_cisco_ucs I believe the plug number is the name of the service profile attached to the server.

HI

thanks for your replay

actually i tried both fence_cisco_ucs and fence_vmware_soap. which one is used for fencing configuration..

i think both method asking for plug number.

i have access to UCS control panel. from where can i get these service or plug number.

i tried te below, i don't i took one profile name from UCS cpanel and checked:

/usr/sbin/fence_cisco_ucs -a 172.22.90.61 -l admin -p duc2Cisco -n org-root/ls-cgceccprd1 -o reboot

Traceback (most recent call last):

  File "/usr/sbin/fence_cisco_ucs", line 147, in

    main()

  File "/usr/sbin/fence_cisco_ucs", line 120, in main

    res = send_command(options, "")

  File "/usr/sbin/fence_cisco_ucs", line 92, in send_command

    c.perform()

pycurl.error: (28, 'connect() timed out!')

that also got error

Thanks & regards,

Ben

bentech4u
Level 1
Level 1

please anyone tell me how can i configure fencing with fence_cisco_ucs.

from where can i get the Ip and all details.. i sthat same IP of KVM we need to give or any other IP

can i know this KVM IP is only for communicating between ucs central and server.?

regards,

Ben

Hi Ben,

Which IPs have you tried?  I think it is the ucs manager ip that you need to use.  Are the ports open between the rhel blade and ucsm?  80/443 tcp depending on your setup.

Hi

ports are opened between servers

ucs manager IP with wat all are the details i need to provide

Regards,

Ben

Hi Ben,

Could try adding ssl and removing the org name like this, sounds like a connectivity issue

fence_cisco_ucs -a 172.22.90.61 -l admin -p duc2Cisco -z -n cgceccprd1 -o reboot

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card