09-18-2014 09:30 PM - edited 03-01-2019 11:50 AM
hi
how do I change the queue depth for an esxi host in 5.1 for ucs b200?
In esxi
I type esxcli system module parameters -m list
it shows
Solved! Go to Solution.
09-18-2014 10:36 PM
Has been covered before, see e.g.
https://supportforums.cisco.com/discussion/12215126/queue-depth-execution-throttle
https://supportforums.cisco.com/discussion/11744776/ucs-hba-queue-depth-vmware-esxi-51
09-18-2014 10:36 PM
Has been covered before, see e.g.
https://supportforums.cisco.com/discussion/12215126/queue-depth-execution-throttle
https://supportforums.cisco.com/discussion/11744776/ucs-hba-queue-depth-vmware-esxi-51
09-19-2014 06:14 PM
hi
does it require a reboot for this?
09-20-2014 08:39 AM
is it recommeded to change the queue depth to 128 or higher? what is the best practice? default is 32 for esxi 5.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide