how to clear Faults on UCSM 1.4(3q)

[florent.tymen]

Hello,

I'm running a 1.4(3q) platform and i'd would like to clear all the faults displayed on the UCSM.

How can i do that ?

i would like to delete faults because in some case, it very old faults.

All the faults are Acknoledged but i can't clear it.

Thanks

[abbharga]

Hi florent,

In UCSM the faults are not cleared untill the condition causing those faults are not cleared. I would advise you to look at the reason for the faults and resolve those which will clear the faults.

Thanks!

./abhinav

[florent.tymen]

Ok, thanks for responding.

i'm ok with your answer but some faults are not cleared.

As a example, there is a critical fault concerning a backup that is not perform.

Fault Code:F999723

But now the backup is working correctly.

thanks

Florent

[abbharga · Accepted solution]

Can you capture a screen shot of the fault or the faults details from the CLI and attach it there.

as well as a capture of the backup jobs.

One quick thing you can try, if its for a back job which is still present in the UCSM: try to delete the job and this should clear the fault. You can then re-create the job once the fault is cleared.

./Abhinav

[florent.tymen]

Thanks Abhinav,

The fault has been cleared, when i deleted the backup jobs.

So i thinks i must parse all the faults.

Thanks a lot.

Florent

[abbharga]

Good to know it worked for you

./abhinav