08-15-2013 08:07 PM - edited 03-01-2019 11:12 AM
Hi all,
I have Fabric Interconnect 6120 firmware 1.4(1m), suddenly my UCS manager problem error is "Software Error: Exception during execution: [Error: Timed out communicating with DME]" and my console ucs manager via GUI error is aplication to time out and to ask relogin.
thanks for response.
08-16-2013 12:52 AM
Hello,
Can you please share output of following commands
connect local-mgmt a
show cluster extended-state
show pmon state
connect local-mgmt b
show cluster extended-state
show pmon state
Padma
08-16-2013 01:12 AM
hello Padma,
thanks for response my discussion.
FI-A --> Down
FI-B --> Primarry
FabricInterconnect-B(local-mgmt)# show cluster state
Cluster Id: 0x11993bd2409d11e0-0xb674000573c97984
Cluster State not available, cluster id mismatch:
local: 11993bd2-409d-11e0-b674-000573c97984, peer: 1054c1ba-f437-11e2-86a1-000de
cd2a804
B: UP, PRIMARY
A: DOWN, INAPPLICABLE
INTERNAL NETWORK INTERFACES:
eth1, DOWN
eth2, DOWN
HA NOT READY
Peer Fabric Interconnect is down
Cluster State not available, cluster id mismatch:
local: 11993bd2-409d-11e0-b674-000573c97984, peer: 1054c1ba-f437-11e2-86a1-000de
cd2a804
FabricInterconnect-B(local-mgmt)# show pmon state
SERVICE NAME STATE RETRY(MAX) EXITCODE SIGNAL CORE
------------ ----- ---------- -------- ------ ----
svc_sam_controller running 0(4) 0 0 no
svc_sam_dme running 51167(4) 0 11 yes
svc_sam_dcosAG running 0(4) 0 0 no
svc_sam_bladeAG running 13(4) 0 6 yes
svc_sam_portAG running 2(4) 0 11 yes
svc_sam_statsAG running 0(4) 0 0 no
svc_sam_hostagentAG running 0(4) 0 0 no
svc_sam_nicAG running 0(4) 0 0 no
svc_sam_licenseAG running 0(4) 0 0 no
svc_sam_extvmmAG running 0(4) 0 0 no
httpd.sh running 0(4) 0 0 no
svc_sam_sessionmgrAG running 0(4) 0 0 no
svc_sam_pamProxy running 0(4) 0 0 no
sfcbd running 0(4) 0 0 no
dhcpd running 0(4) 0 0 no
sam_core_mon running 0(4) 0 0 no
svc_sam_rsdAG running 0(4) 0 0 no
sendi
08-16-2013 01:15 AM
Hello Sendi,
Are you able to ping / SSH into FI A ?
Any information on why FI A is down ?
I would suggest you to open a TAC service request to further investigate the issue.
Padma
08-16-2013 01:32 AM
Hi,
FI-A down because the firmware is crash. so FI-A to suggest open TAC, and now progress download firmware to FI and install firmware.
oke thanks for information.
sendi
11-23-2023 04:45 PM
Hi,
Thanks for raising this. We are also facing this issue. Just wondering if you manage to fix or get around this issue.
- Abhay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide