02-15-2022 07:28 PM
How do I shutdown a B200 blade server in UCS Manager 4.1(1b) with no Service Profile?
The GUI commands Boot Server & Shutdown Server are greyed out.
Do I have to associate a temporary Service Profile, shutdown the server, then un-associate the Service Profile?
02-16-2022 05:07 AM
I am curious how your blade got powered on without a service profile?
Normally no service profile applied = not powered on.
Kirk...
02-16-2022 04:25 PM - edited 02-16-2022 04:27 PM
I performed a RESET on the blade which powers it on.
From the RESET dialog:
You have selected the Reset action for one or more servers.
If you are trying to boot a server from a power-down state, you should not use this method.
If you continue the power-up with this process, the desired power state of the servers will become
out of sync with the actual power state and the servers may unexpectedly shut down at a later time.
To safely reboot the selected servers from a power-down state, click Cancel then select the Boot Server action.
If you are certain that you want to continue with the Reset operation, click OK.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide