Hello,HiI recently build new setup for UCS 5108 chases with 2x blade servers ( B200 M5)using two Cisco UCS 6332 16UP FI connected to Brocade SAN Switch with one Netapp af220 storage FC mode (as show in this diagram). In this setup blades boot fro...
Dearsi want to make a rebuild to raid 1 on my UCS server because this HDD will be out of warranty coverage My current configuration two HDD 1 TB RPM 7K in raid group (Raid 1)i want your opinion for the below rebuild the raid 1 with 1 HDD with 7K Spe...
I'm about to have a bunch of these RAM sticks leftover from an M4 upgrade:32GB DDR4-2133-MHz LRDIMM/PC4-17000/quad rank/x4/1.2vCan I use these in an M3 blade that has E5-2600 v2 series CPUs?The M3 spec sheet says it supports quad rank 32GB LRDIMMs of...
I keep geting stuck in a loop wen setting up the c220 m3. I updated all the drivers and rebooted the server but keeps coming back here. any idea?thanks
Hi Everyone, How can I find out if the Cisco UCS B200 Rack Server is compliance with AFI 33-200, CNSSP-11, NIAP, NIST, FIPS, CMVP, and UC APL? And it is approved by the NIAP/CCEVS approved list?
Hi Everyone, Just wondering if any one knows if the Cisco UCS B200 M6 Blade Server will work with the Mellanox Infiniband 200G switches (https://www.mellanox.com/sites/default/files/doc-2020/wp-introducing-200g-hdr-infiniband-solutions.pdf). Let me k...
I have a C240M4SX. running windows 2012 R2 the IKVM works as expected. I upgraded to windows server 2019 and the IKVM now only shows the screen but no longer accepts keyboard or mouse input nor responds to macro commands. It still responds to keyboar...
Everything post upgrade is working fine, but the /dev/sda1 partition is showing 84% full. It started generating the warning after the upgrade. What is the best course of action to free up some space? I see that there are some fairly large logs in /...
I've be assigned to on board a small amount of Cisco UCS C220s and C240s onto a new DMZ in our network. I've never really worked with UCS but my main concern is getting the management configured correctly. From my understanding there is a dedicated m...
Hello, I'm trying to import the UCSM MIBs into Zenoss. However facing issue. Any idea what's wrong? Thanks /opt/zenoss/share/mibs/site/cisco/CISCO-UNIFIED-COMPUTING-TC-MIB.my:32: identifier `TEXTUAL-CONVENTION' cannot be imported from module `SNMP...
Hi Folks, I tried to boot from a USB my server B series. I insert the USB into a KVM dongle an set the policy as below Local FloppyLocal CD/DVDRemote Virtual DriveCIMC Mounted CD/DVDLocal Disk but didn't work.
Hello, i have question regarding Cisco UCS C220 M5 Server appliance. Is the machine able to auto boot up when power resume after a power outage? Can't find any of that settings in the BIOS. Right now, after turning off the power and then turn back on...
Hi folks,in my UCS Cluster i have four Blade servers. Two B200 M3 and two B200 M4.The M4 servers have two adapters in inventory:UCSB-MLOM-40G-03 and UCSB-VIC-M83-8P.Now my question is:Should i separate my vHBA (fc0 and fc1) on two vCONs (four are sho...
HI all,According to the example of official website curl -GET https://10.10.10.10/redfish/v1/Managers/CIMC/LogServices /SEL/Entries\?\$skip=2\&\$top=2 -u admin:admin123 --insecureThe upper example code can get top two and skipping two records of sel ...
How to use Hyperflex Sizer? Is there any proper documentations with examples?
