cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
303
Views
0
Helpful
1
Replies

IP Pools issci initiator pool - Question

Ben Morgan
Level 3
Level 3

Im trying to expand my IP Pool for the iscsi iniatiator pool. The modify button is greyed out. However When I go to create an additional Block of IP Addresses, the UCS system returns an error "Failed creating [ip address range]. cause: object not found, object of class vnicIPv4PooledISCSIAddr with RN ipv4-pooled-iscsiaddr"

So question, does the UCS system allow you to either expand the IP Pool or create additional IP Address Blocks for the ISCSI Initiator?

 

UCS v2.0 (4b)

 

Thanks

Ben

1 Reply 1

Walter Dey
VIP Alumni
VIP Alumni

Any pools (UUID, MAC, pwwn, nwwn and IP) cannot be modified, e.g. extended; however, it should be possible to create additional pools.

I tested this with the Platform Emulator, and it works ok (see attachment) ; therefore it might be a bug in your version, which got fixed.
 

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card