06-06-2012 11:33 PM - edited 03-01-2019 10:27 AM
Anybody please help me.
I'm already configure UCS manager authentication with LDAP by following this guide https://supportforums.cisco.com/docs/DOC-14642
everything OK but in the last step i can't issue command test aaa server ldap the more detail is on screenshot.
UCS Manager v1.4.1(1m)
06-10-2012 07:55 AM
Sayan,
What is the NXOS (switch firmware) version?
./Abhinav
06-10-2012 07:04 PM
Abbharga Thank for replay me.
i have screenshot of my show version
06-10-2012 07:55 PM
Sayan,
From the image i can see the switches are running the 1.3 firmware.
* Can you make sure you pgrade your switches to match the same version as the UCSM. It is always recommened to run the same firmware version across all the end-points / components across the UCS system.
* the ldap test commend was avaiable from 1.4 firmware (i.e. both the UCSM and the NXOS firmware should be at 1.4)
./Abhinav
06-11-2012 07:02 PM
I'll try to upgrade UCSM and NXOS firmware later because this is production server after that i'll post the result for you.
Did you know ? have another command to debug or test UCSM authen with LDAP. Now it don't work. But i hope it work after upgrade all firmware to 1.4
06-11-2012 07:56 PM
You can use the debug ldap command to debug, however there is no other command to test it.
Since you are running the 1.4 UCSM version you can create a domain for LDAP authentications, turn on the debug and test the connectivity by choosing the ldap domain on the login box.
./Abhinav
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide