Hi,
I am working on a requirement where the EU has requested to have
1. RAID 1 with 60 GB usable space
2. RAID 5 with 650 GB usable space
I have selected UCSC-MRAID12G RAID Controller and upgrade it to 512MB Cache to enable RAID 5 settings.
In addition to that, I selected
1. 300 GB X 2 10K HDDs
2. 600 GB X 3 10K HDDs
I just want to confirm if RAID Controller *UCSC-MRAID12G* can run two RAID groups at the same time.
Regards,
Danish