cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3057
Views
0
Helpful
6
Replies

no Hard disk found UCS C240 M4

yogesh.tatra
Level 1
Level 1

I have purchased  a new server three days before

This  my first server for my home lab

ucs c240 M4

64 Gb (2 x 32 gb)

1 cpu

single hard disk 1.2 TB 10 SAS

i wanted to install Exsi on to this but failed as my HDD is not detected in BIOS

can some one help me please. Any thing I searched is leading me raid but as I am not able to see my HDD i am not able to follow those steps

please help me

 

 

6 Replies 6

Rick1776
Level 5
Level 5
Can you see the HDD in the CIMC?

Also, if the PCIe card that you are installing is a RAID controller card, firmware on the RAID controller must be verified for compatibility with the current Cisco IMC and BIOS versions that are installed on the server. If not compatible, upgrade or downgrade the RAID controller firmware accordingly using the Host Upgrade Utility (HUU) for your firmware release to bring it to a compatible level.

See the below link for details.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html#54156

Single HDD and Internal Raid . not able to see HDD in Bios as well as in CIMC

No at all. I am not able to see that

Leo Laohoo
Hall of Fame
Hall of Fame

CSCuz39568

Thanks, looks like I was right and he has to upgrade the software/BIOS version.

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card