Hi, I installed new server. The problem: I want to use my network card (pci 1) as server network + management (use only one port for both) Description of the current environment: server model: UCS C220 M4S (I have several from this model). On p...
Forum Posts
After apply the configs to create a new FEX connections, I see the following FEX Status: Eth1/25 - Interface Up. State: Fabric Up Below, the messagens from Show Tech #LOGS 2017 Oct 19 15:45:39 SWITCH %$ VDC-1 %$ %NOHMS-2-NOHMS_ENV_FEX_ONLINE: FEX...
Hi All,Is there a document or process on upgrading memory on a B200 M2 blade or any UCS blade? Few of our B200 M2 blades currently have 12x4GB (48Gb) & we have purchased 12x8GB (96GB) sticks for each of the blades from Cisco to carry out the upgrade....
I have 4 Link in Chassis/ FEX discovery global policy. Link is Port Chassis and Multicast Hash is disabled. I need to modify this to 2 Link to add more chassis . If I modify the settings , would there be a disturbance ? Can I do one Fabric Interconne...
Hello UCS Champs, Need your quick help on identify the cause of FCS & RCV errors. I am getting FCS & RCV errors on network port of fabric interconnect. Is this normal or there is some problem. Will it lead to packet loss?? I didn’t find any concr...
The documentation for UCSM lists all of the privileges you can use for creating Roles, but not what resources and permissions each one allows. For example:PrivilegeDescriptionDefault Role AssignmentaaaSystem security and AAAAAA AdministratoradminSyst...
Dear I am installing an oracle OS on the ucs c240 m4 server but at the moment of enabling the virtual media and choose the iso to boot and in the order of boot was chosen to boot with that iso and does not boot to proceed to install
Hi We are configuring the B200M4 servers to boost in UEFI secure boot (Firmware 3.1.3 and planning to go with 3.2.x before putting in production). Found some articles, but not sure about the parameters to be mentioned. We plan to create a master LUN ...
Greetings,Recently I deployed two S3260 storage servers, provisioned LUNs and and now need to resize a data LUN. I'm reading through configuration guide under the "Storage Profiles" subsection. It seems the resizing of LUNs is not supported, or maybe...
Resolved! Rename Service Profile in UCS
I'd like to rename our UCS service profiles. They are in use for production ESX hosts, so I'm worried about downtime. Can I rename them without affecting production? Is there any downtime associated with renaming them?
Hi This is the first time we are trying to install Windows 2016 on M200 M4. We mentioned CD / DVD as 1st Boot device and with virtual media policy mentioned the iso local path from where we access the KVM console and also tried mentioning remote p...
Hello Everyone. I am using UCSC-C220 but I have a booting problem. I checked HDD from CIMC I think, there is no fault from Hardware. Could Raid Setting be reason of this kind of problem? Also, I could not fine Raid Controller in Booting ...
Resolved! UCS C210 Firmware
When I attempt to upgrade the firmware via TFTP I get an Image_CRC_Failure error message on both the web and CLI. I have tried re-downloading the image and I have tried multiple image versions. I have also tried upgrading via the web and I get to 5...
Hi all, I'm having a hard time explaining some behavior that I'm seeing on a new UCS Mini, and was hoping one of the experts here would be willing to share some insight. Sorry for no diagram, but this is a new system and we have a pretty simple t...
DearPlease help me with a topic I am trying to update the firmware of a UCS 5108 that is currently in version 3.1 (1e) and leave it in version 3.2 (1d) wanted to know if it is convincing to do the update directly or first update to the next version
