OID to be able to get san-port-channel config from UCS FI 6248 UP

[RAFal]

I am trying to use SNMP to get the current status of san-port-channel from UCS FI 6248UP but I am not able to find matching OID.
The FI works in End-Host-Mode and san port channel consists of 2 ports (TNP on FI side and TF on MDS connected to it). The san port channel works fine and I can see flogi on the MDS. Any help would be much appreciated.
-raf

[Kirk J]

Maybe  start at .1.3.6.1.4.1.9.9.719.1.19.37   cucsFabricFcSanPcTable

Kirk...

[RAFal]

Thanks Kirk for your reply and hint, however that OID does not give me a chance to find san-port-channel member ports. Any further ideas would be much appreciated.
-raf