04-20-2013 01:38 AM - edited 03-01-2019 10:59 AM
Folks,
I have 2 disjoing domains and I am using the new feature in UCS 2.1 to allow only certain vlans over a port channel. But, What I am noticing is that there is no way to prevent vlan 1 to flow on that port channel on the UCS side even though i do not see it in the vlan manager.
Any thoughts would be highly appreciated.
Solved! Go to Solution.
04-20-2013 05:30 AM
VLAN 1 will always be allowed on your uplinks regardless of disjoint L2 configuration. This is one of the limiations of the system. This is called out in the config guide:
Regards,
Robert
04-20-2013 05:30 AM
VLAN 1 will always be allowed on your uplinks regardless of disjoint L2 configuration. This is one of the limiations of the system. This is called out in the config guide:
Regards,
Robert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide