cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
639
Views
0
Helpful
4
Replies

Problem accessing remotely to a UCS 6120XP

altorres75
Beginner
Beginner

Hello,  I have 2 ucs 6120XP clustered and I cannot access them remotely.  Routing is OK, local ping is OK, but when I try to ping the virtual IP address or the management ip for each unit there is no response.

Any hints?

Regards,

Alex Torres

1 Accepted Solution

Accepted Solutions

Eric Rose
Cisco Employee
Cisco Employee

Might be a silly question but is the out of band management port connected in the same vlan?

View solution in original post

4 Replies 4

Eric Rose
Cisco Employee
Cisco Employee

Might be a silly question but is the out of band management port connected in the same vlan?

hehehe, I mistakenly clicked correct answer.

Yes, they are in the same vlan and subnet.  I have 2 SVIs, the one in the same vlan and subnet responds ok, as it is local, but when I ping from the switch using as source the other SVI I get no response.

ok, problem solved.

Great to hear.

Happy Holidays!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: